Request A Quote - Tanks  -  Fax 281-825-4099... Phone 281-825-4000 Phone 800-537-9444

To do the our best work for you. Please fill out some information about your application, and fax it back to us at the above number.  Gene Vincent, Sales Dept..               Home

Name

Company
Address
City
State
 Zip
Phone(xxx) xxx-xxxx

Fax

Email

Preferred Method of Contact:

General Tank Specifications

1. QUANTITY:
 		    CAPACITY: US GALLONS
LITER

2. TANK CONFIGURATION:  
 


Additional Description:

3. LOCATION:    Indoor Outdoor

    Alcove:           No      Yes      Wall Thickness:
Additional Description: (high & low ambient temperature, clean room, special alcove requirements, ets.)

4. DIMENSIONAL RESTRICTIONS:

Maximum Height:    Maximum O.D.:    No Restrictions     
Notes:

5. PRODUCT CONTACT ALLOY:

304 316L Polyethylene Polypropylene Fiberglass Other

6. HEAD DESIGN
Top Head:      Dished    Center Bridge and Cover    Two Piece Cover
Advise other:

Bottom Head:      Dished    Coned    Flat Pitched
Advise other:

7. DESIGN PRESSURE
PSIG Internal Pressure:
Temperature:
PSIG External Pressure (vacuum):
ASME Stamped: Yes No

8. PRODUCT DATA:
Viscosity:
Specific Gravity:

Describe other characteristics:

9. AGITATION: (describe agitation duty)

Special Requirements: (voltage, explosion-proof motor, Bakery Industry Sanitation Standards Committee design, variable speed, NEMA rating, CIPA-H, baffle, special seal, etc.)

10. HEAT TRANSFER SURFACE
PSIG Internal Pressure:
Temperature:
PSIG External Pressure (vacuum):
ASME Stamped: Yes No

Duty: Entire area available Sidewall Bottom
     Hold only at deg.F. with deg.F. Media
     Heat/cool and hold from deg.F. to deg.F. in hrs
     with deg.F. Media

Notes:

11. THURMALOX:
Yes No As required by design

12. INSULATION:

Top Head:        Yes No As Required by design
Sidewall:           Yes No
Bottom Head:   Yes No
(Specify type and thickness, if critical):

13. OUTER JACKET
Stainless Steel Mild Steel
Bottom Sheathing: Flat Dished Coned

14. LIFT LUGS
Yes No As Required by design

15. SUPPORT DESIGN
Ball Feet Flat Pads
Adjustable: Yes No
Casters Brakes: Yes No Side Lugs Skirt
Material: Mild Steel Stainless Steel
Seismic Zone: Outlet Height:
Notes:

16. FINISH:
 Product Contact: Sheets Welds
External:     Top Head Welds
Sidewall Welds
Bottom Welds
Legs Welds
Other:

17. MANWAY:
Location: Top Side
Special Requirements: (critical size, steam sealed, lift assist, Special Gasket, CIP baffle, etc.)

18. VENT OR VENT CONNECTION:
Standard Screen and Cap
Connection Only: Size Type
Special Requirements: (vent filter, silo type lines, Tri-Clover vacuum breaker, nitrogen blanket, CIP interlock, insulation and heat tapes, etc.)

19. OUTLET:
Size: Type:

20. THERMOWELLS
Indicating: No.: Type:
Recording: No.: Type:

21. LEVEL INDICATOR
Shell Only
Location: Type:
Balance of System by:

22. CIP FIXTURE:
Inlet tube: Welded in Removable
Connection Only: Size Type
Other:

23. RUPTURE DISC
Size: Type:
Notes:

24. INLETS AND OTHER ADDITIONAL NOZZLES
No. Size Type Location
25. LADDER AND PLATFORM       
Yes No
26. NOTES
Please Print and Fax this for to 281 825 4099 Fax Number, or save as a pdf and email it to us and we will get right back to you, thanks for letting us help you...  

Amprotec, Inc.         

PO 680747      Houston, Texas 77268       

Phone  281 825 4000    Fax 281 825 4099

 Hit Counter