COMMON DO'S AND DON'TS WITH POLY TANKS:
Do not over-tighten tie down straps or bands which may cause excessive stress on the tank. A "snug" fit is best.
Do not attach heavy valve and plumbing fittings on a bulkhead fitting without proper support. Always use flexible connections to allow the tank to expand and contract.
Always water test the tank before using to be sure fittings are sealed tight.
Do not over-tighten the bulkhead fitting. Fittings are installed to proper torque ratings at the time of manufacturing but may become loose through movement in shipping. When you get your tank, hand-tighten the fitting and then give it 1/4 of a turn to make sure it's tight.
WHAT MATERIAL IS USED TO MAKE YOUR TANKS?
A linear, high-density polyethylene resin provides outstanding environmental stress crack resistance. The resin is UV stabilized but by keeping the tank sheltered or indoors you will prolong the life of your tank. Click on the following link for specific information regarding the resin used to manufacture above ground tanks. Resin Information
ARE YOUR TANKS FDA APPROVED AND IS IT SAFE TO STORE WATER IN AN ABOVE GROUND TANK?
Yes, it is safe to store water in our above ground tanks and below ground cistern tanks shown on our website. The resin used to manufacture these tanks meets FDA specifications for safe storage of potable water. Click on the following link for specific information regarding the FDA status of the resin. FDA status of resin
ARE YOUR ABOVE GROUND TANKS NSF APPROVED?
NSF International, founded in 1944 as the National Sanitation Foundation, is known for the development of standards, product testing and certification services in the areas of public health, safety and protection of the environment. We have the NSF certification, from specific plants, for our potable water tanks.
The NSF certification process is done on a plant by plant basis. We currently have select tanks that are certified NSF approved in our Tooele, UT; Washougal, WA and Hanford, CA manufacturing plants. For further details, please give us a call.
The resin that we use to manufacture our above ground tanks is considered an NSF approved resin. Click on the following link for information regarding the NSF status of the resin. NSF status of resin
DOES THE COLOR OF A TANK HAVE ANY SIGNIFICANCE?
Generally, colors are used to designate one grade of tank from another and is for production identification only except for Water Only tanks. Our standard color for premium weight tanks is a natural or white and for heavy duty tanks is it light blue. Do not be misled into thinking that a color increases the life expectancy or UV resistance of a tank.
CHEMICALS CAN I STORE IN THE TANKS?
Several fertilizers and chemicals can be stored in our above ground tanks. We strongly recommend that you contact the chemical manufacturer to see if their product is compatible with high density, linear polyethylene. If they cannot answer your question, call our Customer Service department and they will be happy to research it for you. Try to have as much information available as possible such as the temperature of the product, the percentage of product (Ex: Hydrochloric Acid, 50%) etc. We have a link for our chemical resistance guide due to the infinite range of chemical combinations, concentrations and temperatures.
ATTENTION: THIS GUIDE IS GENERAL ONLY, FINAL APPROVAL SHOULD BE OBTAINED FROM YOUR CHEMICAL PROVIDER!!!
STORAGE PETROLEUM PRODUCTS IN THE TANKS?
We recommend that you do not store petroleum products in our tanks because they will soften the tank walls.
STORAGE OF CHEMICALS OR FERTILIZERS IN THE BLACK OR DARK GREEN WATER STORAGE TANKS?
No, these tanks are designed for water storage only. They are rated at 8 pounds per gallon.
CAN I USE AN ABOVE GROUND TANK FOR THE STORAGE OF BIODIESEL?
Biodiesel is approved on a case by case basis, B100 may be stored with stainless steel fittings and viton gaskets... please contact us to discuss this application.
SPECIFIC GRAVITY, HOW MANY POUNDS PER GALLON WILL YOUR TANK HOLD?
There are two grades of polyethylene tanks - premium and heavy duty. The premium weight tank has been designed and is manufactured to meet a specific gravity of 1.5, equaling 12.5 pounds per gallon at 73 degrees F. The heavy-duty tank has been designed and is manufactured to meet a specific gravity of 1.9, equaling 15.75 pounds per gallon at 73 degrees F. (An increase in liquid temperature will substantially decrease the specific gravity rating!)
WHAT IS THE WALL THICKNESS OF YOUR TANKS?
We refer you to the paragraph above that relates to specific gravity/pounds per gallon. Because the wall thickness varies from top to bottom on a tank, it is not the best gauge for determining the quality of a tank. The very bottom of the tank is the thinnest part of the tank and is made that way to flex when the tank is empty or full. Generally the wall becomes thicker as you go from the top to the bottom of a vertical tank. This is done to increase resistance to head pressure created by the height of the liquid in the tank. The radius of the tank is thicker to increase strength where it is most critical. The actual weight of the tank is also not a good comparison when shopping for tanks. Just because a competitor may use more material in the tank does not make it a better tank. That is determined by the resin, mold design and the steps taken during the rotomolding process.
MAXIMUM TEMPERATURE THAT YOUR TANKS WILL WITHSTAND?
Polyethylene storage tanks have a maximum storage temperature of 140 degrees F. Contents with a temperature in excess of 140 degrees F-even for a short period of time-can weaken the tank's structural integrity and make it susceptible to deformation and failure.
WHAT WILL HAPPEN TO MY TANK IF I LEAVE IT OUTSIDE IN FREEZING TEMPERATURES?
The tank itself does not have a minimum temperature rating. If you plan to keep the liquid in the tank and you know that it will freeze, make sure that you leave room for expansion. The most likely part to crack on the tank is the bulkhead fitting which can be easily replaced.
HOW MANY YEARS WILL MY TANK LAST?
There is no good way to determine the life span of a polyethylene tank. Many variables can have an effect on the tank - what type of material is being stored in the tank? Is the tank used indoors or outdoors? If the tank is outdoors, what part of the country are you located in? Tanks used outdoors in Arizona or Florida are subjected to more intense sunshine than in Minnesota for example. UV rays will have a detrimental effect on the life span of any poly tank. Is the tank being used strictly for stationary storage or for transport? Each of these factors will have an effect on a polyethylene tank.
I HAVE A TANK THAT IS SEVERAL YEARS OLD. HOW CAN I DETERMINE IF IT IS STILL SAFE FOR USE?
If a tank is beginning to show its age, you will be able to see fine fissures or hairline cracks referred to as crazing. Look for crazing on the dome of a vertical tank in the area where sunlight is most intense. The top of a transport tank, which has been allowed to set outside all year, is a good place to look as well. These fine cracks will become more intense and visible as time goes on and will become stress cracks. Giving the tank a good hit with a baseball bat is as good a test as any. The resilience of a good tank will be obvious. A tank beyond its life expectancy will sound dull when struck and could crack as a result. It is better to check early and be safe versus losing valuable chemicals and incurring cleanup expense. When a tank is determined to be unsafe or you know it is getting old, it is best to make it a non-drinking water only tank.
HOW SHOULD I PLUMB MY TANK?
Rigid piping must not be connected directly to a tank. Flexible connections are required between the tank fitting and the pump to allow for expansion and contraction of the tank as it is filled and as liquid is withdrawn. A good quality flexible hose is best. We also recommend proper support under heavy valves and fittings that may be attached to the tank fitting. Please refer to the warning labels on our tanks for details. These plumbing recommendations will also extend the life of the tank by reducing stress on the tank. Please consult us for valves and fittings are recommendations for all compatible plumbing requirements.
Take a look at our pictures section for suggestions
HOW TIGHT CAN I TIGHTEN A BULKHEAD FITTING?
When bulkhead fittings are installed at the factory, a torque wrench with a special adapter is used to tighten them. Sometimes the fittings loosen and it may be necessary to tighten them. Without a torque wrench, our recommendation is to hand tighten the nut and then give it another 1/4 to 1/2 turn. Do not over tighten as this may pinch the gasket and cause the fitting to leak. Some fittings are turn right to tighten and some are turn left, please note and adjust as needed.
CAN YOUR TANKS BE PRESSURIZED?
No, our tanks cannot be pressurized.
CAN YOUR TANKS BE BURIED?
Tanks specifically designed for above ground use cannot be put underground. If it is put below ground, the weight of the earth around the tank will cause the walls to collapse. We do make septic and cistern tanks that are designed to be buried. See "Water & Waste Tanks" under Main Links.
WHAT TYPE OF SURFACE IS REQUIRED FOR PLACEMENT OF A VERTICAL TANK?
Inspect the surface to ensure a smooth, level area that will supply full bottom support. A properly constructed concrete pad that is capable of supporting the contents of the tank is the best support and is recommended above 2,000 gallons. Other materials such as very flat blacktop, or contained, packed sand or pea gravel have been used successfully. All surfaces must maintain uniform support through freeze/thaw, erosion and other disturbances.
CAN I PAINT MY TANK?
Painting a tank is not something that we recommend but we know that it is frequently done. Once painted, the tank would not be covered under our normal warranty. Based on what distributors and customers have told us, to prepare the tank for painting, wipe it down with a paint thinner to remove any oily residue. The paint that seems to adhere the best is an automotive urethane which is commonly used to paint car bumpers. Keep in mind that over time, as a tank expands and contracts, the paint will usually crack and will need to be reapplied.
DO I NEED TO CLEAN MY TANK BEFORE USE AND IF SO, HOW DO I CLEAN IT?
If you are planning on using your tank for potable water storage, you may want to rinse it with a very mild bleach solution to sanitize the tank and then rinse it again with clean water following the bleach solution rinse.
DO YOUR PRODUCTS REQUIRE A MATERIAL SAFETY DATA SHEET (MSDS)?
No, our products are exempt from the MSDS requirements established in the Hazard Communication section (29 CFR 1910.1200) of the Occupational Safety and Health Administration (OSHA) regulations. Our products are classified as “articles” as referred to in 1910.1200(b)(6)(v) and as defined in 1910.1200(c).
1910.1200(c) “Definitions”"Article" means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical (as determined under paragraph (d) of this section), and does not pose a physical hazard or health risk to employees.
WHAT IS THE WARRANTY ON YOUR TANKS?
The premium weight tanks and black or dark green vertical water storage tanks carry a three year warranty from date of manufacture and the heavy duty tanks carry a five year warranty from date of manufacture. Should a defect appear within the warranty period, we will supply a new, equivalent tank in replacement thereof. Liability is limited to the value of the tank itself and specifically excludes the cost of installation and/or removal or consequential damages.
HOW CAN I TELL IF MY TANK IS UNDER WARRANTY?
All tanks are embossed with a serial number that is 1/2" in height. You will usually find the serial number by the fill-opening of the tank. To get a general idea of when your tank was manufactured, click on the following link, If you need a specific manufacture date, please contact us.
Ask for Art Woods
Mail: PO Box 680747 Houston, Texas 77268
Ship: 32926 Tamina - Magnolia, Texas 77354