Polyethylene cone bottom tanks with steel support bases, full drainage and long lasting support, for water tank and chemical tank process elements.

Amprotec  by Alltanks LLC                                                                     Home

Polyethylene Plastic Cone Bottom Tanks with Steel Stands to 11,500 Gallons

Cone Bottom Tanks: Manufactured from linear polyethylene in one piece, seamless construction this tank series is designed for either indoor or outdoor use. Cone bottoms provide for quick and complete drainage. Polyethylene Stands through 3000 gallons, Carbon steel supports stands up through 11,500 gallons. Two styles to choose from: JC – Commercial Series - Maximum specific gravity of 1.5 at 73° F JA –Industrial Series - Maximum specific gravity of 1.9 at 73° F       Molded in calibrations Molded in tie down slots 30° cone angle   Capacity (GAL) Size Dia. X Ht. (IN.) Manway (IN.) JC Tank Part # JA Tank Part # JK Stand Part # JH Stand ** Part # 1500 86 x 84 16 TC8648JC TC8684JA TC8648JK TC8684JH 1650 95 x 77 16 TN9577JC TN9577JA TN9577JK TN9577JH 2500 95 x 105 16 TN2500JC TN2500JA TN2500JK TN2500JH 2650 86 x 132 16 TC2650JC TC2650JA TC2650JK TC2650JH 5500 119 x 146 16 TN5500JC TN5500JA TN5500JK TN5500JH 7500 141 x 148 16 TN7500JC TN7500JA TN7500JK TN7500JH    11,500 141 x 206       16 TN11500JC TN11500JA TN11500JK TN11500JK ** JH Stand must be used when seismic restraints are required. NOTE: JK Stand adds approximately 12" to overall height. JH Stand adds approximately 16" to overall height.

We look forward to working with you, please contact for us for additional information at 800 537 9444, or Email Art Snow Link
This site is Copyright © 1999-2004 Alltanks.com LLC

Last updated 01/06/08 09:04:00 PM